Clock Display; Display Backlight Dimmer - Roberts Blutune 40 Manual

Clock display

1. The clock display on your radio can be shown using either a 12 or 24
hour clock format.

Display backlight dimmer

The brightness of the display can be adjusted when the radio is in standby
or when the unit is in use.
1. In order to adapt the intensity of the display to suit the ambient room
lighting when the unit is in the standby mode, press the Dimmer button
on your radio to select the dimmer brightness from High-Medium-Low
and an almost off 'night-time' setting.
2. Alternatively when your radio is in use, press and release the Menu
button until the advanced menu shows on the display.
3. Rotate the Tuning control until 'SYSTEM' appears on the display.
Press and release the Tuning control.
4. Rotate the Tuning control until 'DIMMER' appears on the display.
Press and release the Tuning control.
5. Rotate the Tuning control to choose between, 'LOW', 'MEDIUM',
'HIGH' or to 'OFF'.
6. Press and release the Tuning control to confi rm your selection.
• When the radio is in standby mode, pressing a button (other than
the dimmer button) or turning the rotary control will cause the radio
to switch to a higher brightness level for a few seconds. This is so
that if the standby brightness level is set to the almost off 'night time'
setting, it is possible to see the time.
33
1
2
3-6