Setting Up the Device
The BEETLE /iPOS plus was developed for an in-house installation.
The device has a pedestal, but can also be installed on the wall. If the
system is installed on the wall, it is necessary to remove the pedestal
and fix the device with a VESA-mounting.
Set up the BEETLE /iPOS plus system where it will not be exposed to
extreme environmental conditions. Protect the device from vibrations,
dust, moisture, heat and strong magnetic fields.
Ergonomic Terminal Workplace
Please observe the following when setting up your terminal workplace:
BEETLE /iPOS plus User Manual
Avoid direct glaring and
reflective glaring. Use the
screen only in a controlled
luminance surounding.
Install the device with a
viewing direction that is
parallel to the windows.
Avoid reflective glaring
caused by electric light
sources.
9