Wincor Nixdorf BEETLE User Manual page 11

When setting up the device, ensure that the power socket on the

device and the grounded-contact power socket are easily accessible.
Whenever work of any kind is done on the device, as well as when

data cables are plugged and/or unplugged, the device must be com-
pletely disconnected from the line voltage. To do so, turn the device
off and unplug the power cord.
To disconnect the device from the supply voltage completely, switch

off the device and disconnect the power plug of the system.
Never plug in or unplug data communication lines during thunder-

storms.
Protect devices from vibrations, dust, moisture and heat.

Always dispose of used parts, such as batteries, in an environmentally

safe manner.
In emergencies (e.g. damaged housing or damaged power cable,

penetration by liquids or foreign bodies), the device must be switched
off immediately, the power plug
Service of Wincor Nixdorf or your dealer must be notified.
Your BEETLE system is the result of modern technical innovation. So

please see for according structural and technical surroundings to
antee a faultless and efficient work of your BEETLE. Therefore, you
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This
kind of electricity system is known as TN-S network. Do not use PEN
conductors!
Please also observe the recommendations of the norm DIN VDE 0100,
Part 540, Appendix C2 as well as EN50174-2, §5.4.3.Thus you can help
to avoid possible mal functions.
If you replace a storage medium, make sure that you only use the stor-

age medium recommended or approved by Wincor Nixdorf.
You can connect or disconnect USB devices during operation of your

BEETLE, provided that these devices comply with the specifications
according to usb.org.
printer) should be connected to or disconnected from your
system only after the BEETLE has been switched off.
BEETLE /iPOS plus User Manual
disconnected
Other peripheral devices (such as PoweredUSB
and the Customer
BEETLE
guar-
3