Pitney Bowes DM100i Quick Reference Manual page 8

Changing the Normal Preset to a Different Class
The Normal Preset must include a class. You cannot simply key in a value.
If a standard one-ounce first class letter is not your most frequently used setting, you can change the Normal Preset to any class you wish.
The way you define presets is to (1) set the meter just the way you want it, and then (2) take a "snapshot" of this configuration. Just follow
the steps below.
Set Your Meter
1
From the Home screen press the key next to the
CLASS line.
Sep 03 09 0.44
CLASS: 1st Cl Ltr
MAN WT: 0lb 1.0 oz
2
You'll see the postal classes list; select the class
you wish to assign to your normal preset. (For this
example, the illustrations will reflect a user who
chooses Priority. The same general procedures will
apply, however, to any class selected.)
0lb 1.0 oz
1st Class
Priority
Pkg Service
Changing the Normal Preset
to a Different Class
3
If offered, select a sub-category of the selected class.
(In this example, the Env/Pkg offering under Priority)
0lb 1.0 oz
Env/Pkg $4.95
Flat Rt Env $4.95
Sm Fl Rt Box $4.95
4
Select any USPS fee-based service(s) you wish to
include with your new Normal preset. You can use the
lighted Page-Up and Page-Down buttons to the right of
the screen to review fee-based services available. When
you have completed selecting special services, press the
Done key found on the last line of every screen. This will
return you to the Home screen and you are now ready to
take your Normal Preset "snapshot".
SERVICES
Insurance
COD
Done
$4.95