How To Restore Factory Default - CyberData V2 Manual

4. Press the Save button at the bottom of the page when you're done.
Then press the Reboot button for your changes to take effect.
* You need to reboot for changes to take effect
Save Reboot

How to Restore Factory Default

Quick Steps
1. Press and hold the the RTFM switch on the back of the device until the status and paging
lights come on.
RTFM
2. Continue to press the switch until after the indicator lights go off, and then release it. The
Paging Adapter settings are now restored to the factory defaults.
© Copyright Schmooze Com, 2013
Line In Line Out
RTFM Switch
Interface
Ext. Power
+48VDC
GND