Table of Contents
Advertisement
Operating the base station on the PABX
Activating/deactivating display
of VoIP status messages
If the function is activated, a VoIP status
code for your service provider is displayed.
Activate the function e.g. if you have prob-
lems with VoIP connections. You will
receive a provider-specific status code,
which supports the service when the
problem is analysed. You will find a table
with the possible status screens in the
appendix (page 97).
¢
¢
v
Ð
Settings
~
Enter the system PIN and press
.
§OK§
Show Stat. on HS
Select and press
Note:
For how to make the setting on the Web con-
figurator, see page 93.
Check the base station
MAC address
Depending on your network configura-
tion, you may have to enter your base sta-
tion MAC address, for example, into your
router's access control list. You can check
your base station MAC address:
v 5 5 O 2 Q
The base station MAC address is displayed.
a
Press and hold (idle status).
72
¢
Telephony
VoIP
(½ = on).
§OK§
Operating the base station
on the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide. The settings only con-
cern fixed network connections.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Setting the flashing time
You can set the flashing time.
¢
¢
v
Ð
Settings
¢
¢
Fixed Line
q
Select flashing time and press
.
§OK§
The current language is indicated by ½.
a
Press and hold (idle status).
Telephony
Recall
Advertisement
Table of Contents
