Registering other handsets on the
Gigaset SP450 IP
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
¤
Press and hold the registration/paging
key on the base station (page 1)
(min. 1 sec.).
Note:
You can also make changes on the base station
with a Gigaset C45 handset.
De-registering handsets
You can de-register any registered handset
from any registered Gigaset S45 handset.
u
Open list of internal users.
The handset you are currently
using is indicated by < .
q
Select the handset to be de-
registered.
Press the display key.
§Options§
De-reg. H/Set No.
Select and press
~
Enter the base station system
PIN (default setting: 0000).
Press the display key to con-
§Yes§
firm the prompt.
a
Press and hold (idle status).
The handset is de-registered immediately,
even if it is not in idle status.
.
§OK§
Locating a handset ("paging")
You can locate your handset using the
base station.
¤
Press the registration/paging key on the
base station (page 1) briefly.
¤
All handsets will ring at the same time
("paging"), even if ringer tones are
switched off.
Ending paging
¤
Press the registration/paging key on the
base station (page 1) briefly.
Or
¤
Press talk key c on a handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception
¢
¢
v
Ð
Settings
¢
Select Base
s
Select one of the registered
base stations or
press
§OK§
Using several handsets
(Best
Base).
Handset
and
Best Base
.
57