Display In Idle Status; Activating/Deactivating The Handset; Menu Guidance - Gigaset A420 User Manual

Hide thumbs Also See for A420:
Table of Contents

Advertisement

Display in idle status

Once the phone is registered and the time set, the idle status is shown as in this example.
Screen display
Reception between the base station and the handset:
-
Good to poor:
-
No reception:
Battery charge status:
U
-
Charged over 66%
V
-
Charged between 34% and 66%
e
-
Charged between 11% and 33%
=
-
Charged less than 11%
=
-
Flashes: batteries almost empty (less than 10 minutes talktime)
= e
-
¢
If No Radiation mode (

Activating/deactivating the handset

a
Press and hold the
key to activate or deactivate the handset. If you place a deactivated handset in the base station
or charging cradle, it will automatically activate after approx. 30 seconds.
Your phone is now ready for use.
If you have any questions about using your phone, please read the tips on troubleshooting ("Questions and answers",
¢
page 14) or contact our Customer Care team

Menu guidance

Your telephone's functions are accessed via a menu consisting of several levels (menu overview
Main menu (first menu level)
¤
When the handset is in idle status, press the display key
The functions in the main menu are shown by means of an icon and the function's name.
Selecting a function:
¤
You can scroll between functions using the control key
¤
Press the display key
submenu and the first entry is displayed.
If you press the display key
Submenus
The functions in the submenu are indicated by name.
Selecting a function:
¤
You can scroll between functions using the control key
¤
Press the display key
is displayed.
If you press the display key
the operation.
Any settings you have not confirmed by pressing the display key
Reverting to idle status
From any point in the menu:
¤
Press and hold the end call key
¤
Do not press any key: after 2 minutes, the display will automatically revert to idle status.
Ð ¨ § ¦
¥
V
U
Batteries are charging
page 16) is activated, the
§OK§
or the right control key
"
or briefly the end call key
§OK§
to select the displayed function. This opens the corresponding submenu and the first entry
"
or briefly the end call key
a
or
5
½
icon is displayed in the top left.
¢
page 14.
§Menu§
or right on the control key
q
. The function is shown in the display.
v
to select the displayed function. This opens the corresponding
a
, the display returns to idle status.
q
. The function is shown in the display.
a
, the display returns to the previous menu level or you cancel
§OK§
are lost.
Ð
U
INT 1
23.04. 10:53
'
Menu
¢
page 15).
v
to open the main menu.

Advertisement

Table of Contents
loading

Table of Contents