Returning To Idle Status; Returning To The Previous Display Page; Activating/Deactivating Key And Display Lock - Gigaset SL910 Manual

Hide thumbs Also See for SL910:

Table of Contents

Using the phone

Returning to idle status

Briefly press end call key a.

Or:

If you do not press any key and do not touch the display, the display automati-

cally reverts to idle status after approximately three minutes.

Just like the idle display pages, the

' icon appears on the left-hand side

of the header on almost every page.

Touch the icon to return to the previous display page (move backwards step by

step).

The key and display lock prevents the phone being operated unintentionally.

When the handset is in idle status:

Press and hold the v menu key to activate or deactivate the lock.

When you activate the key and display lock, the Keys and display locked message

is displayed briefly. The display backlight switches itself off.

If you touch the display when the key lock is activated, nothing happens; if you try

to press a key, a corresponding message is displayed.

The lock deactivates automatically when you receive a call. It is reactivated when

the call is finished.

Please note

When the keypad lock is active, you cannot call emergency numbers.

The display is automatically locked with the aid of a proximity sensor if you

hold the handset to your ear (display backlight disappears). This lock is deac-

tivated again when you remove the handset from your ear.

The sensor is located on the right next to the earpiece. If you cover it acciden-

tally with your finger during a call, the display will also be locked.

Display Language

Table of Contents

Sl910a