Making E-Mail Settings - Gigaset S540 IP User Manual

Example: You are online using one of your
phone's handsets and your PC both at the
same time. You have assigned your phone
(Resource-name "phone") the
your PC (resource name "PC") the priority
10. In this case, any message addressed to
your Jabber ID will be sent to your phone.
¤
Open the following Web page:
¢
Settings Messaging
¤
Enter the user ID (max. 50 characters)
and password (max. 20 characters) that
you used to register with the Messen-
ger server in the fields
Authentication password.
¤
Enter the IP address or the DNS name of
the Messenger server that you are
registered with for Instant Messaging
(max. 74 alphanumeric symbols) in the
field Jabber server.
¤
Enter the number of the communica-
tion port on the Jabber server in the
field
Jabber server
is 5222.
¤
Enter a resource name (max. 20 char-
acters) in the
Resource
The default is: phone.
¤
Enter the priority for your phone in the
field Priority. Select a number between
128 (highest priority) and 127 (lowest
priority) for the priority.
The default is: 5
¤
Click on the button.
Set
Note:
For how to use your handset to go online and
chat with or call buddies, see page 48.
Priority 5 and
¢
Messenger.
Jabber ID and
port. The default port
field.

Making e-mail settings

You can use your phone to be notified
about new e-mail messages on your
incoming e-mail server (page 45).
You must store the address/DNS name of
your incoming e-mail server and your per-
sonal access data in the phone, so that it
can connect to the incoming e-mail server
and your mailbox.
As soon as the data is stored in the phone,
it will periodically (approx every 15 min-
utes) connect to the incoming e-mail
server and check if any new messages
have been received.
¤
Open the following Web page:
¢
Settings Messaging
¤
Enter the user name (account name)
agreed with the Internet provider
(max. 50 characters) in the field
Authentication Name.
¤
Enter the password that you agreed
with your provider for accessing the
incoming e-mail server (max. 20 char-
acters; case sensitive) in the field
Authentication password.
¤
Enter the name of the incoming e-mail
server (POP3 server) (max. 74 charac-
ters) in the field
pop.theserver.com.
¤
Click on the button to save the set-
Set
tings in your phone.
Note:
For how to show the messages from your mail-
box on your handset, see page 46
Web configurator
¢
E-Mail.
Server. Example:
POP3
91