Table of Contents
Advertisement
Base station settings
Activating/deactivating
repeater mode
With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls being
made via the base station at that time.
Precondition: a repeater is registered
with the base station.
¢
¢
v
Ð
Settings
¢
Add. Features
Repeater Mode
Select and press
Press the display key to con-
§Yes§
firm the security prompt.
Setting the default connection
You can make settings according to
whether you want to make calls via VoIP or
fixed network by default.
¢
¢
v
Ð
Settings
¢
Default Line
VoIP
/
Fixed Line
Select and press
When making calls:
¤
Press the talk key c briefly if you
want to make the call via the default
connection.
¤
Press and hold the talk key c if you
want to make the call via the other con-
nection type.
68
Base
(½ = on).
§OK§
Telephony
(½ = on).
§OK§
Updating the base station
firmware
If necessary, you can update your base sta-
tion firmware.
The firmware update is downloaded
directly from the Internet by default. The
relevant website is preconfigured in your
phone.
As an alternative to uploading the
firmware via the Internet, it can also be
loaded from a local PC. You can specify the
PC via the Web configurator (page 92).
This setting applies only to the following
firmware update.
Precondition:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed
network or VoIP.
u
There is no internal connection
between the registered handsets.
u
No other handset has opened the base
station menu.
Starting the firmware update manually
¢
¢
v
Ð
Settings
Software Update
Select and press
~
Enter the system PIN and press
.
§OK§
The base station establishes a connection
to the Internet or to the local PC.
Press the display key to start
§Yes§
the firmware update.
Base
.
§OK§
Advertisement
Table of Contents
