Assign Sending And Receiving Numbers To Handsets - Gigaset S540 IP User Manual

Configuring the fixed network
connection
You can assign a name to your fixed net-
work connection. The connection will be
shown under this name on the handset
and in the Web configurator interface, e.g.
when assigning sending and receiving
numbers (page 87), with call display
(page 21).
¤
Open the following Web page:
¢
Settings Telephony
¤
In the
Fixed Line Connection
on the Edit button.
¤
Enter your fixed network number or the
name of your choice (max. 16 charac-
ters) for your fixed network connection
in the Connection Name or Number
The default is "Fixed
Assign sending and receiving
numbers to handsets
Your phone, can be assigned up to five
phone numbers: the fixed network
number and up to four VoIP phone num-
bers.
You can assign these numbers to the indi-
vidual handsets that are connected to your
base station as receiving and sending
numbers. The means that for each hand-
set, you define the calls that it will ring for,
and which VoIP account (sending
number) is used by your VoIP provider to
calculate outgoing VoIP calls.
Note:
A handset is assigned the following numbers
after it is registered with the base station:
– Receiving numbers: all phone numbers
assigned to the phone (fixed network and
VoIP).
– Sending numbers: the fixed network
number and the VoIP phone number that
you entered at the start of the phone con-
figuration.
¢
Connections.
area, click
field.
Line".
¤
Open the following Web page:
¢
Settings Telephony
¢
Number assignment.
This will display the names of all registered
handsets, and a list for each handset with
the phone numbers that are configured
and activated for the phone. The connec-
tion names are shown in the
column. The fixed network connection is
always at the end of the list.
¤
Define a VoIP phone number as the
sending number for each handset. To
do this, click on the option behind the
phone number in the
previous assignment will automatically
be deactivated.
Note:
The fixed network number is permanently
assigned to each handset as a sending
number. This assignment cannot be deacti-
vated. This guarantees that emergency
numbers can be dialled from every handset.
¤
Select the phone numbers for each
handset (fixed network, VoIP) that are
to be assigned to the handset as receiv-
ing numbers. To do this, click on the
option behind the phone number in
the column. Every handset can
Receive
be assigned several phone numbers or
no phone number (½ = assigned).
¤
Now click on
Set
Notes:
– If a VoIP phone number that has been
assigned to a handset as a sending number
is deleted/deactivated, then the handset
will automatically be assigned the first VoIP
phone number.
– If a phone number is not assigned to any
handset as a receiving number, calls to this
number will be signalled on all handsets.
– If you have not assigned receiving numbers
to any of the handsets, calls to all connec-
tions will be signalled on all handsets.
Web configurator
Connections
column. The
Send
to save your settings.
87