Web Configurator; Configuring The Phone Via Your Pc; Connecting Pc With Web Configurator; Registering, Setting The Web Configurator Language - Gigaset S540 IP User Manual

Web configurator

Web configurator
The Web configurator is the Web interface
for your handset. It allows you to make the
settings for your phone's base station via
your PC's Web browser.
Note:
Depending on your VoIP provider, it is possible
that you will be unable to change individual
settings in the Web configurator.
Configuring the phone via
your PC
Preconditions:
u
A standard Web browser is installed on
the PC, e.g. Internet Explorer version
6.0 or higher, or Firefox version 1.0.4 or
higher.
u
The phone and PC are connected with
each other via a router.
Notes:
– The phone is not blocked while you make
your settings in the Web configurator. You
can also use your phone to make calls or
change base station or handset settings on
your handset at the same time.
– While you are connected to the Web config-
urator, it is blocked to other users. It cannot
be accessed by more than one user at any
time.
With the Web configurator on your phone
you have the following options:
u
Configure your phone access to the
local network (IP address, gateway to
the Internet).
u
Configure your phone for VoIP.
u
Define the data server for firmware
updates and load new firmware onto
the phone if necessary.
u
Obtain information about your phone's
status (firmware version, MAC address
etc.).
74
Connecting PC with
Web configurator
¤
Launch the Web browser on your PC.
¤
Enter the phone's IP address into the
address field of the Web browser,
e.g. http://192.168.2.2.
¤
Press the return key.
A connection is established to the phone's
Web configurator.
Note:
Your phone's IP address can change if you have
activated dynamic IP address assignment
(page 77).
You can check the phone's current IP address
on the handset (page 71).
Registering, setting the
Web configurator language
Once you have successfully established
the connection, the Web page
be displayed in the Web browser.
You can select the language you want the
menus and Web configurator dialogs to be
displayed in. The language that is cur-
rently selected is displayed in the top field
of the Web page.
¤
If necessary, click on
of available languages.
¤
Select the language.
¤
In the bottom field of the Web page,
enter your phone's system PIN (default
setting: 0000) to access the Web con-
figurator functions.
¤
Click on OK.
Once you have successfully registered, a
Home opens with general information on
the Web configurator.
will
Login
to open the list