Installing An Atmux Vlan Driver - Allied Telesis AT-2400 Series Installation Manual

Installing an ATMUX VLAN Driver

To install an ATMUX driver, perform the following procedure:
Note
ATMUX does not currently support the AT-2801, AT-2916T, AT-2970,
and AT-2971 Series Adapters.
1. From the desktop, right-click the My Network Places icon and
select Properties from the menu.
The window shown in Figure 71 is displayed.
Figure 71 Network Connections Window
2. Right-click on the appropriate local area connection then select
Properties.
Network Adapter Card Installation Guide - Book I
91