Windows Me - Allied Telesis AT-2400 Series Installation Manual

Manually Installing a Network Adapter Driver

Windows Me

40
This section contains the procedure for manually installing a network
adapter driver in a Windows Me operating system. The AT-2801,
AT-2916, AT-2970 and AT-2971 Series Adapters do not support Windows
Me.
Note
Please review the
performing the following procedure.
1. Shutdown Windows Me and power OFF your computer.
2. Install the network adapter card. Refer to
Adapter Card on page 13 and the documentation that came with
your computer for instructions.
3. Power ON the computer.
The Microsoft Installation Wizard displays the window shown in
Figure 20, notifying you that it has detected a new adapter card in
the computer.
Figure 20 Add New Hardware (1 of 2)
4. Select Automatic search for a better driver (Recommended).
Installation Guidelines on page 30 before
Installing the Network