Link Aggregation (Lagg) Support - Allied Telesis AT-2400 Series Installation Manual

Link Aggregation (LAGG) Support

LAGG support is available after installing or updating the sklagg.sys
driver. Along with the driver itself, the Allied Telesyn Network Control is
automatically installed, which can be used to add, remove, and
configure TEAMs.
Note
In order to enable LAGG support for dual link adapters, RLMT must
be disabled for such an adapter. See the section about independent
use of dual link ports on how to disable RLMT.
After installing or updating the driver, start the Allied Telesyn Network
Control as follows:
1. From the desktop, select Start, Settings, then Control Panel.
2. Double-click on Allied Telesyn, Inc. Network Control.
Use the online help provided by the Allied Telesyn Network Control for
general information on TEAMs and learn how to add, remove, and
configure them.
Network Adapter Card Installation Guide - Book I
127