Driver Options - Allied Telesis AT-2400 Series Installation Manual

AT-2916T, AT-2970, and AT-2971 VLAN and Link Aggregation

Driver Options

128
You can modify several options of the ATGIGxx driver in order to
optimize the operation of your Allied Telesyn AT-297x Series Gigabit
Ethernet Adapter.
The driver options and parameters can be set with the Allied Telesyn
Network Control, which is automatically installed along with the driver,
as follows:
1. From the desktop, select Start, Settings, then Control Panel.
2. Double-click on Allied Telesyn, Inc. Network Control.
3. Select the network adapter or port for which you want to modify an
option or parameter.
The available options and parameters are displayed in the lower half
of the Allied Telesyn Network Control window.
4. Modify the desired options or parameters according to your needs.
5. Select Apply.
Use the online help provided by the Allied Telesyn Network Control for
an explanation of the available options and parameters and learn how to
configure them.
If you should encounter any problems with your Allied Telesyn AT-2970
Series Gigabit Ethernet Adapter, re-read the instructions above and the
documentation supplied with the operating system.
Additionally refer to your system event log file (using the Event Viewer)
and check it for entries from ATGIGxx.
If your particular problem is not listed or the error persists, please send
your system event log file or at least the event id number and the
logging data (as WORDs) of the entries made by ATGIGxx to our
technical support. For Allied Telesyn Technical Support information,
refer to Contacting Allied Telesyn on page 11.