Virtual Lan (Vlan) Support - Allied Telesis AT-2400 Series Installation Manual

AT-2916T, AT-2970, and AT-2971 VLAN and Link Aggregation

Virtual LAN (VLAN) Support

126
VLAN support is available after installing or updating the skvlan.sys
driver. Along with the driver itself, the Allied Telesyn, Inc. Network
Control is automatically installed, which can be used to add, remove,
and configure VLANs.
Note
In order to enable VLAN support for dual link adapters, RLMT must
be disabled for such an adapter. See the section about independent
use of dual link ports on how to disable RLMT.
After installing or updating the driver, start the Allied Telesyn Network
Control as follows:
1. From the desktop, select Start, Settings, then Control Panel.
2. Double-click on Allied Telesyn, Inc. Network Control.
Use the online help provided by the Allied Telesyn Network Control for
general information on VLANs and learn how to add, remove, and
configure them.