Manually Installing a Network Adapter Driver
Windows 98
36
This section contains the procedure for manually installing a network
adapter driver in a Windows 98 operating system. The AT-2801,
AT-2916T, AT-2970 and AT-2971 Series Adapters do not support
Windows 98.
Note
Please review the
performing the following procedure.
1.
Shutdown Windows 98 and power OFF your computer.
2.
Install the network adapter card. Refer to
Adapter Card
on page 13 and the documentation that came with
your computer for instructions.
3.
Power ON the computer.
The Microsoft Installation Wizard displays the window shown in
Figure 17, notifying you that it has detected a new adapter card in
the computer.
Figure 17 Add New Hardware Wizard Window (1 of 3)
4.
Select Next.
Installation Guidelines
on page 30 before
Installing the Network