Proxim ORiNOCO AP-800 Hardware Installation Manual page 21

2.2.5.4 Step 4: View LEDs
When the device is powered on, it performs startup diagnostics. When startup is complete, the LEDs show the operational
state of the device. Tabulated below is the behavior of the four LEDs on the device.
LED Symbol
Power
LED
Ethernet
LED
2.4 GHz
LED
5 GHz
LED
: When the Reload button is pressed, the Power LED glows amber.
ORiNOCO® 802.11n Access Points - Hardware Installation Guide
Glows green when the device is switched ON.
• Glows green when the device is connected to a 1 Gbps link.
• Blinks green when the traffic is being transmitted or received on the 1
Gbps link.
• Glows amber when the device is connected to a 100 Mbps link.
• Blinks amber when the traffic is being transmitted or received on the
100 Mbps link.
• Glows red when the device is connected to a 10 Mbps link.
• Blinks red when the traffic is being transmitted or received on the 10
Mbps link.
• Glows green when the wireless interface 2 is in operational state.
• Blinks green when wireless traffic is being transmitted or received.
• Glows green when the wireless interface 1 is in operational state.
• Blinks green when wireless traffic is being transmitted or received.
Hardware Overview and Installation
Behavior Color
21