Proxim ORiNOCO AP-800 Hardware Installation Manual page 13

3. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.
4. Hold the device with its rear panel facing up. Next, align two keyholes on the device with the two holders on the
mounting plate.
5. Carefully slide the device down until the holders on the mounting plate fasten securely onto the keyholes of the
device.
Ceiling Mounting:
To mount the device to ceiling, follow the following steps:
1. If the device is powered on, unplug all the power cables.
2. Place the mounting plate onto the ceiling with the embossed inverted letter "L" facing your right. Refer
Plate
3. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.
4. Hold the device with its rear panel facing front. Next, align two keyholes on the device with the two holders on the
mounting plate.
5. Carefully slide the device towards rear side until the holders on the mounting plate fasten securely onto the keyholes
of the device.
2.1.4.3 Step 3: Plugging in the Cables
Cabling with Power Adapter (Not supplied with the product package)
To plug in the cables by using a 5V DC power adapter:
•
Connect one end of the CAT5e/CAT6 Ethernet cable (not supplied with the product) to the device's ethernet port and
the other end to a PC.
•
Plug the barrel of the power cable into the device's power socket, only after the device installation is complete.
Cabling with Gigabit PoE (Not supplied with the product package)
To use Power over Ethernet (PoE), we recommend you to use our Gigabit Ethernet PoE adapter ORiNOCO 1-Port Active
Ethernet DC Injector (See
•
Connect one end of the ethernet cable to the Data In port of the DC Injector and the other end to a PC.
•
Connect one end of the second ethernet cable (not supplied with the product) to the device's ethernet port, and the
other end to the Data & Power Out Port of the DC Injector, only after the device installation is complete.
: PoE should be installed only in an indoor network, maintaining a controlled temperature.
ORiNOCO® 802.11n Access Points - Hardware Installation Guide
Figure 2-4 Mount the Device
Optional Accessories) and follow the following guidelines:
Hardware Overview and Installation
Mounting
13