Orinoco® Ap-8100 - Proxim ORiNOCO AP-800 Hardware Installation Manual

3.2 ORiNOCO® AP-8100
Category
Power Requirements
Radio Module
Wireless Protocol
Frequency
Channel bandwidth
Modulation
Device Interface
LED Indicators
Antennas
Network Architecture Type
Transmit Power
ORiNOCO® 802.11n Access Points - Hardware Installation Guide
Power Adapter: 12V/1.25A
Power over Ethernet (PoE) (optional): 48V / Any 803.3af compliant Gigabit PoE
Dual Radio Access Point, 2x2 MIMO per radio
Radio1: IEEE 802.11a/n
Radio2: IEEE 802.11b/g/n
802.11a/n
802.11a
802.11g/n
802.11g
5.150 - 5.850 GHz*
2.4 - 2.483 GHz
* Subject to Individual Country Regulations
20MHz and 40MHz for 802.11n
20MHz for 802.11a/b/g
•
BPSK, QPSK, 16-QAM and 64-QAM:
– With data rates of 6.5 Mbps -300 Mbps for 802.11n
– With data rates of 6 Mbps - 54 Mbps for 802.11a and 802.11g
•
DSSS, CCK: With data rates of 1 Mbps -11 Mbps for 802.11b
Ethernet: Auto-sensing 10/100/1000BASE-T Ethernet
Step 4: View LEDs
Refer
4 Modular High Efficiency built-in PIFA Antennas with a peak gain of:
– 3dBi for 2.4 GHz frequency.
– 4dBi for 5 GHz frequency.
Infrastructure
11b
Data Transmission
Rates Power*
(Mbps)
1 to 11 20
* Combined Tx Power values
* MCS refers to Modulation Coding Scheme.
Specification
11a/g
Data Transmission
Rates Power*
(Mbps)
6 to 48 20
54 20
Hardware Specifications
11n
Data Transmission
Rate Power*
(MCS*)
MCS 20
0 to 5
MCS 6 19
MCS 7 17
24