Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS - 60CM
Prepare installation
Do not lift the appliance by the door handle.
Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective gloves
during installation.
Please note that the weight of this
appliance is approximately 31kg
(unpacked). Take care when lifting it
into the housing unit - always use an
appropriate method of lifting.
Remove the fixing screws from the
polythene bag on the top of the appliance,
but leave the appliance in the base tray
packaging until you are ready to install it.
If this appliance is to be installed near to
a corner where the adjacent cabinets run
at right angles forward of the appliance,
there must be a gap of at least 90 mm
between the appliance and the cabinets,
to prevent overheating of the cabinets.
Housing dimensions
The appliance is designed to fit into a
standard 600mm wide housing unit with
minimum internal dimensions as shown.
591mm is to the underside of the worktop
when the appliance is built under, or to the
underside of the panel above, when the
appliance is installed into a tall housing
unit.
Hide quick links:
Advertisement
Table of Contents
