Belling GAS B Service Manual
  1. Manuals
  2. Brands
  3. Belling Manuals
  4. Oven
  5. GAS B
  6. Service manual

Belling GAS B Service Manual

Gas built-in
Hide thumbs
Table of Contents

Advertisement

Quick Links

1
BELLING GAS B/I
SERVICE MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Belling GAS B

Summary of Contents for Belling GAS B

  • Page 1 BELLING GAS B/I SERVICE MANUAL...

  • Page 2: Table Of Contents

    COMPONANT REMOVAL..............84-91 TECHNICAL SPECIFICATIONS............92-92 FAULTFINDING GUIDES..............93-95 THIS MANUAL COVERS THE FOLLOWING MODELS :- BELLING BI 60 G BELLING BI 60 LPG BELLING BI 70 G BELLING BI 70 LPG BELLING BI 90 G BELLING BI 90 LPG...

  • Page 3: Appliance Rating Plate

    PRODUCT IDENTIFICATION Appliance rating plate location The appliance rating plate is located on the right-hand side of the front frame and also on the rear service panel YEAR MONTH NUMBER OF PRODUCTION FOR THE MONTH PRODUCT IDENTIFICATION CODE It is important that during all service calls the model and serial numbers are recorded on all paper work.
  • Page 4 Users Guide & Installation Handbook Belling Built In Gas AU...
  • Page 5 CONTENTS Introduction Before Using Safety Using the Grill Using the Ovens Cleaning Installation Technical Customer Care Please keep this handbook for future reference, or for anyone else who may use the appliance.
  • Page 6 Please ensure that you have the product’s model no and serial no available when you call. These can be found on the silver data label on your product. Alternatively, general information, spares and service information is available from our website: www.belling.co.uk...
  • Page 7 OUR WARRANTY Should you need it ..Inside the paperwork which has come with this appliance, there is a leaflet and card explaining the terms of our extended warranty and guarantee. In order to apply for our five year guarantee, simply fill in the details on the card and post it off, this will register your appliance.
  • Page 8 BEFORE USING THE PRODUCT • Make sure that you have removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. • It is advised that you turn the ovens and/or grill on for a short while. This will burn off any residues left from manufacturing.
  • Page 9 SAFETY ✓ Always make sure that the oven Caution: This appliance is for cooking purposes only. It must not be used for shelves are resting in the correct position other purposes, for example room between two runners. Do not place the heating.
  • Page 10 USING THE GRILL - GAS Caution: Accessible parts maybe hot when the Place the handle over the edge of the grill grill is used. Young children should be kept pan, at the narrow side edges. Slide the away. handle to the centre, and locate between the handle position indicators.
  • Page 11 USING THE GRILL - GAS Aluminium foil Using aluminium foil to cover the grill pan, or putting items wrapped in foil under the grill creates a fire hazard. Using the grill Push the grill pan towards the back of the shelf, to position it under the grill.
  • Page 12 USING THE GRILL - ELECTRIC (IN A GAS PRODUCT) Caution: Accessible parts may be hot when the grill is used - young children should be kept away. Open the top oven / grill door. Push in and turn the top oven / grill control knob clockwise to the ‘FULL ON’...
  • Page 13 USING THE GRILL - ELECTRIC (IN A GAS PRODUCT) Detachable grill pan handle Using the grill Push the grill pan towards the back of the grid shelf, to position it under the grill. The speed of grilling can be controlled by selecting a higher or lower shelf position.
  • Page 14 USING THE TOP OVEN - GAS Preheating Using the top oven Always preheat the top oven for 15 Ignition minutes. However, if the main oven Push in and turn the top oven control knob is being used at the same time, then anticlockwise to the ‘FULL ON’...
  • Page 15 USING THE TOP OVEN - GAS Oven furniture Slow cooking Baking tray and roasting tins Make sure that frozen foods are thoroughly THAWED before cooking. For best cooked results and even browning, the maximum size baking trays Do not slow cook joints of meat or poultry and roasting tins that should be used are weighing more than 2¼kg / 4 lb.
  • Page 16 USING THE TOP OVEN - GAS Top oven baking guide Dish Recommended Suggested Approxiamte gas mark shelf cooking time position (preheated oven) Scones top - middle 10 - 15 mins Meringues “S” slow setting bottom 2 - 3 hours Cakes Small cakes middle 15 - 25 mins...
  • Page 17 USING THE TOP OVEN - GAS Traditional fruit cakes Roast turkey It should be remembered that ovens can Roasting turkey involves cooking two vary over time, therefore cooking times different types of meat - the delicate light can vary, making it difficult to be precise breast meat, which must not be allowed when baking fruit cakes.
  • Page 18 USING THE TOP OVEN - GAS Notes: Roasting guide • When cooking stuffed meat or poultry The times given in the roasting guide are calculate the cooking time from the total only approximate, because the size and weight of the meat plus the stuffing. age of the bird will influence cooking times as will the shape of a joint and the •...
  • Page 19 USING THE MAIN OVEN - GAS Using the main oven These zones of heat can be useful as different dishes requiring different Ignition temperatures can be cooked at the same time, when more than one shelf is used. Push in and turn the main oven control knob to the ‘FULL ON’...
  • Page 20 USING THE MAIN OVEN - GAS For roasting joints of meat or poultry, and for pot roasts preheat the oven to gas mark 6 and cook for 30 minutes, then adjust the oven control to the “S” slow setting for the remainder of the cooking time.
  • Page 21 USING THE MAIN OVEN - GAS • Turkey should be roasted at gas mark Traditional fruit cakes 5 for 20 minutes per lb, plus 20 minutes, It should be remembered that ovens can unless packaging advises otherwise. vary over time, therefore cooking times •...
  • Page 22 USING THE MAIN OVEN - GAS Notes: Roasting guide • When cooking stuffed meat or poultry The times given in the roasting guide are calculate the cooking time from the total only approximate, because the size and weight of the meat plus the stuffing. age of the bird will influence cooking times as will the shape of a joint and the •...
  • Page 23 USING THE PROGRAMMER / CLOCK - GAS (if fitted) The clock on this product has two modes Press and release the (minus) and of operation, fully automatic or semi- (plus) buttons simultaneously. Set the automatic. This product is intended for time of day, eg 2.00 with the use on the semi-automatic mode only.
  • Page 24 USING THE PROGRAMMER / CLOCK - GAS (if fitted) Semi-automatic cooking The Duration method • Press the Function button twice,(1) which will skip past the Minute Minder. • The LED display will flash the word ‘dur’, (2) and the ‘A’ will flash on the left hand side of the display.
  • Page 25 CLEANING GENERAL • Baby oil can be used to restore stainless steel finishes - but only use a • It is important to clean the product few drops. Don’t use cooking oils as they regularly as a build up of fat can affect can contain salts, which will damage the its performance or damage it and may metal.
  • Page 26 CLEANING • To remove the glass panel, open the door wide, hold the top and bottom edges and slide out. • Warning: DO NOT operate the appliance without the glass panel correctly fitted. • For your safety, glass door panels are made of toughened glass.

  • Page 27: Installation Instructions

    INSTALLATION INSTRUCTIONS Before you start: Please read the electrical regulations. In the Republic of instructions. Planning your installation will Ireland, Installers should refer to IS813 save you time and effort. Domestic Gas Appliances. Prior to installation, ensure that the local Ventilation Requirements distribution conditions (nature of the gas The room containing the appliance should...
  • Page 28 INSTALLATION INSTRUCTIONS - 60CM Prepare installation Do not lift the appliance by the door handle. Whilst every care is taken to eliminate burrs and raw edges from this product, please take care when handling - we recommend the use of protective gloves during installation.
  • Page 29 INSTALLATION INSTRUCTIONS - 60CM Important: Do not modify the outer panels When installed in a typical 600mm deep built in housing unit, the false of this appliance in any way. back should be removed from the Ensure that you route all mains electrical housing unit to provide the necessary cables and flexible tubing well clear of any depth for installation.
  • Page 30 INSTALLATION INSTRUCTIONS - 70CM Before you start - please read the If this appliance is to be installed near to instructions carefully - planning your a corner where the adjacent cabinets run installation will save you time and effort. at right angles forward of the appliance, there must be a gap of at least 90mm Look at the different ways the appliance between the appliance and the cabinets,...
  • Page 31 INSTALLATION INSTRUCTIONS - 70CM Method 1: Without housing unit 1. Take the 6 No 8 x 12mm (silver) self (between 2 base units) tapping screws from the polythene bag, and use them to fit one runner to Before installing the appliance, check the each side of the appliance.
  • Page 32 INSTALLATION INSTRUCTIONS - 70CM Method 1: Without housing unit (between 2 base units) Shown with fixing kit...
  • Page 33 INSTALLATION INSTRUCTIONS - 70CM Method 1: Without housing unit (between 2 base units) Shown without fixing kit...
  • Page 34 INSTALLATION INSTRUCTIONS - 70CM Method 2: Housing unit with To fix the runners (if required) internal height less than 710mm. 1. Take the side trims, hold it against Note: You will not need the 2 side trims the side of the base unit, and use it to (687mm long) or the appliance runners mark off the 687mm from the top for this installation.
  • Page 35 INSTALLATION INSTRUCTIONS - 70CM Method 2: Housing unit with internal height less than 710mm Shown with fixing kit...
  • Page 36 INSTALLATION INSTRUCTIONS - 70CM Method 2: Housing unit with internal height less than 710mm Shown without fixing kit...
  • Page 37 INSTALLATION INSTRUCTIONS - 70CM Method 3: Housing unit with internal height Remove any fixings that may prevent 710mm or more entry of the oven into housing, or obstruct the gas inlet pipe. The cabinetry should Note: You will not need the 4 runners and be kept structurally sound by fixing to 2 trims that are packed with the oven for adjacent cabinets, floor or worktop.
  • Page 38 INSTALLATION INSTRUCTIONS - 90CM Prepare installation When the false back is removed, it is normally the case that the support shelf Do not lift the appliance by the door handle. for the appliance leaves a gap between the back edge of the support shelf and the Remove the fixing screws from the rear wall of approximately 80mm.
  • Page 39 INSTALLATION INSTRUCTIONS - 90CM Dimensions The appliance is designed to fit into a standard 600mm wide housing unit, with minimum internal dimensions as shown. Note: All sizes are nominal, some variation is to be expected.
  • Page 40 INSTALLATION INSTRUCTIONS Connect to gas supply 4. Flexible connections should comply with BS 669. Parts of the appliance 1. The inlet to the appliance is ISO 7 likely to come into contact with a - Rp ½” internal thread situated flexible connector have a temperature towards the top right hand rear corner.
  • Page 41 INSTALLATION INSTRUCTIONS Connect to the electricity supply As the colours of the wires in the mains lead for the appliance may not correspond This appliance must be connected by a with the coloured markings identifying the competent person, using fixed wiring via terminals in your spur box, proceed as a double pole switched fused spur outlet, follows:...
  • Page 42 INSTALLATION INSTRUCTIONS - 60/90CM Secure appliance into housing unit There are 4 black no 8 x 25mm long chipboard screws for securing appliance to cabinet. Insert appliance into cabinet and secure - open the oven door and screw the 4 screws through the holes in the front frame.
  • Page 43 INSTALLATION INSTRUCTIONS - 70CM Step 4: Secure appliance into housing unit Installing a hob above the appliance Note: The unit housing the appliance must When the appliance is installed under a be appropriately fixed. worktop, with a hob installed above it, the installation instructions for the hob Method 1: Care must be taken to ensure must be read in conjunction with these...
  • Page 44 INSTALLATION INSTRUCTIONS Step 5: Commissioning Oven Ignition Push in and turn the main oven control Pressure test point knob anti clockwise to the ‘FULL ON’ position (gas mark 9). The ignition Use the oven burner. From inside the oven system will spark automatically. Push in remove the burner cowl.

  • Page 45: Technical Data

    TECHNICAL DATA Data badge Appliance class Lower part of front frame and rear of Class 3, built-in oven and grill appliance Countries of destination Type of gas GB - Great Britain, IE - Ireland This cooker must only be used on Natural Electrical supply Gas only.

  • Page 46: Customer Care

    CUSTOMER CARE FAQs • Automatic cooking will normally produce condensation when the oven is What parts of the appliance can be washed in cooling down with food inside. a dishwasher? Should the cooling fan continue to run once • Any enamelled parts such as the the appliance has been switched off? grillpan can be cleaned in a dishwasher, as can oven shelves and shelf guides.
  • Page 47 CUSTOMER CARE CHANGING LIGHT BULBS (where fitted) Warning: There is a risk of electric shock, so always make sure you have turned off and unplugged your appliance before starting. Always allow the product to cool down before you change a bulb. Not all appliances have the same number and type of bulbs.
  • Page 48 Before you contact a service agent, make sure that you have the following information to hand: Model Number Serial Number Date of Purchase Postcode Glen Dimplex Australia, Unit 2, 205 Abbotts Road, Dandenong, South Victoria 3175, Australia e-mail: sales@glendimplex.com.au web: www.glendimplex.com.au Model Names: Belling BIG 08 27484 00b 03.2010...
  • Page 49 PRODUCT: BEL BI 60 G AU Built-in COLOUR: Stainless Steel CODE: 444440500 ISSUE: DATE: Product Product Description Replace Date 073103210 CHASSIS bi 60 g 00358 603005400 FRONTFRAME 60bi mot 00358 603041700 FRONTFRAME bi60 mot 0314 082233400 FAN cooling DP203A-2123LST-C31 0609 503005700 PANEL INTER rear 60bi gas 0622...
  • Page 50 EV MAIN DOOR BI DROP ALTERNATIVE HANDLE DESIGN THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 52 BUILT-IN 60/70/90 FASCIAS 720 FASCIAS A003 600/900 FASCIAS A003 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 53 EV_OVEN_MAIN_G SCALE 0.666 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 54 FURNITURE MAIN OVEN ALTERNATIVE SHELF GUIDES- KEY NUMBER FOR OPPOSITE HAND 421 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 55 PRODUCT: BEL BI 60 LPG AU Built-in COLOUR: Stainless Steel CODE: 444440501 ISSUE: DATE: Product Product Description Replace Date 073103210 CHASSIS bi 60 g 00358 603005400 FRONTFRAME 60bi mot 00358 603041700 FRONTFRAME bi60 mot 0314 082233400 FAN cooling DP203A-2123LST-C31 0609 503005700 PANEL INTER rear 60bi gas 0622...
  • Page 56 EV MAIN DOOR BI DROP ALTERNATIVE HANDLE DESIGN THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 58 BUILT-IN 60/70/90 FASCIAS 720 FASCIAS A003 600/900 FASCIAS A003 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 59 EV_OVEN_MAIN_G SCALE 0.666 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 60 FURNITURE MAIN OVEN ALTERNATIVE SHELF GUIDES- KEY NUMBER FOR OPPOSITE HAND 421 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 61 PRODUCT: BEL BI 90 G NG AU Built-in COLOUR: Stainless Steel CODE: 444440560 ISSUE: DATE: Product Product Description Replace Date 073103212 CHASSIS bi 90 g 00358 603005600 FRONTFRAME 90bi mot 00358 603041900 FRONTFRAME 90bi mot 0314 082233401 FAN cooling DP200A-2123XST 0610 503005900 PANEL INTER rear 90bi gas...
  • Page 62 PRODUCT: BEL BI 90 G NG AU Built-in COLOUR: Stainless Steel CODE: 444440560 ISSUE: DATE: Product Product Description Replace Date 0967 082518800 WIRE TRIVET grill pan 1130 073104814 FACIA MECH bi 90 g prog 0786 081544903 SOLENOID single sov RAA 03 KB 0917 082998700 TIMER LED143/ESK1351-018...
  • Page 63 FURNITURE TOP OVEN ALTERNATIVE SHELF GUIDES - KEY NUMBER FOR OPPOSITE HAND 420 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 64 EV TOP DOOR BI DROP ALTERNATIVE HANDLE DESIGN THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 65 EV MAIN DOOR BI DROP ALTERNATIVE HANDLE DESIGN THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 67 BUILT-IN 60/70/90 FASCIAS 720 FASCIAS A003 600/900 FASCIAS A003 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 68 FURNITURE MAIN OVEN ALTERNATIVE SHELF GUIDES- KEY NUMBER FOR OPPOSITE HAND 421 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 69 PRODUCT: BEL BI 90 G LPG AU Built-in COLOUR: Stainless Steel CODE: 444440561 ISSUE: DATE: Product Product Description Replace Date 073103212 CHASSIS bi 90 g 00358 603005600 FRONTFRAME 90bi mot 00358 603041900 FRONTFRAME 90bi mot 0314 082233401 FAN cooling DP200A-2123XST 0610 503005900 PANEL INTER rear 90bi gas...
  • Page 70 PRODUCT: BEL BI 90 G LPG AU Built-in COLOUR: Stainless Steel CODE: 444440561 ISSUE: DATE: Product Product Description Replace Date 0967 082518800 WIRE TRIVET grill pan 1130 073104814 FACIA MECH bi 90 g prog 0786 081544903 SOLENOID single sov RAA 03 KB 0917 082998700 TIMER LED143/ESK1351-018...
  • Page 71 FURNITURE TOP OVEN ALTERNATIVE SHELF GUIDES - KEY NUMBER FOR OPPOSITE HAND 420 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 72 EV TOP DOOR BI DROP ALTERNATIVE HANDLE DESIGN THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 73 EV MAIN DOOR BI DROP ALTERNATIVE HANDLE DESIGN THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 75 BUILT-IN 60/70/90 FASCIAS 720 FASCIAS A003 600/900 FASCIAS A003 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 76 FURNITURE MAIN OVEN ALTERNATIVE SHELF GUIDES- KEY NUMBER FOR OPPOSITE HAND 421 THE PARTS ON THIS DRAWING ARE REPRESENTATIVE ONLY AND MAY VARY VISUALLY. THIS DRAWING IS GENERIC AND PARTS SHOWN MAY NOT BE ON ALL MODELS.
  • Page 77 BELLING BI 60G - AU ISSUE A Wiring colour code: Bk -Black, Bn -Brown, Bu -Blue, Gn -Green or Green/Yellow, Or -Orange, R -Red, W -White, Y -Yellow. PROGRAMMER GRILL T/OVEN MICROSWITCH GRILL T/OVEN ROTARY SWITCH L70c THERMAL CUTOUT GRILL ELEMENT...

  • Page 78: Wiring Diagram

    BELLING BI 90G - AU Wiring Diagram ISSUE 1 Wiring Colour Code : Bk -Black, Bn -Brown, Bu -Blue, Gn - Green/Yellow, Or -Orange, R -Red, W -White, Y -Yellow. PROGRAMMER GRILL T/OVEN MAIN OVEN GRILL T/OVEN MICROSWITCH ROTARY SWITCH...
  • Page 79 B B ELLING GAS BUILT IN REPAIR MAINTAINANCE PROCEDURES...
  • Page 80 IMPORTANT BEFORE CARRYING OUT ANY SERVICING WORK ALWAYS DISCONNECT FROM THE ELECTRICAL SUPPLY...
  • Page 81 1) REMOVING THE MAIN OVEN DOOR REMOVE THE 2 SCREWS FROM THE DOOR EXTRUSIONS AS SHOWN MOVE THE DOOR TO REST POSITION AND SLIDE THE DOOR UPWARDS OUT OF THE HINGES 2) REMOVING THE TOP OVEN DOOR REMOVE THE 2 SCREWS FROM THE DOOR EXTUSIONS AS SHOWN PUT THE DOOR IN THE REST POSITION AND PULL THE DOOR...
  • Page 82 3) REMOVAL OF FACIA PANEL REMOVE THE CONTROL KNOBS REMOVE THE 4 SECURING SCREWS AS SHOWN (2 EACH SIDE) PULL FACIA AWAY TO REMOVE FULLY DISCONNECT THE WIRING TO THE TIMER 4) REMOVING THE DOOR SEALS THE DOOR SEAL IS REMOVED BY JUST PULLING IT IS SECURED IN THE GAP BETWEEN THE CAVITY AND FRONFRAME AND REQUIRES NO...
  • Page 83 5) REMOVAL OF REAR SERVICE PANEL REMOVE ALL SCREWS FROM THE REAR PANEL (14 IN TOTAL ) REMOVE THE REAR SERVICE PANEL TAKE CARE AS THE COOLING FAN WIRES NEED TO BE DISCONNECTED TO REMOVE THE PANEL FULLY NOTE THE SIDE PANELS ON ALL B/I PRODUCTS CANNOT BE REMOVED IGNITION GENERATOR MAIN OVEN SOLENOID...
  • Page 84 REPLACEMENT OF COMPONANTS A) TIMER FOLLOW STEP E REMOVAL OF FACIA PANEL REMOVE 4X SECURING SCREWS (TORX) REMOVE TIMER FROM FACIA B) THERMOSTATS FOLLOW STEPS 3/5 AND REMOVE THE FACIA PANEL AND REAR SERVICE PANEL REMOVE THE LICON M/SWITCHES FROM THE FACIA PANAEL...
  • Page 85 DISCONNECT THE BUNDY TUBES AND THERMOCOUPLES FROM THE THERMOSTATS REMOVE THE 4 SCREWS FROM THE INNER FACIA TO RELEASE THE COMPLETE GAS RAIL RELEASING THE GAS RAIL FRON THE BRACKET AT THE REAR ACCESS TO THE 2 SECURING SCREWS CAN NOW BE OBTAINED WHEN REPLACING ALWAYS ENSURE THAT A NEW SEALING WASHER IS FITTED...
  • Page 86 C) GRILL MICROSWITCH THE GRILL MICROSWITCH CAN NOW BE REMOVED BY RELEASING THE HOLDING CLIPS AS SHOWN D) GRILL ELEMENT FOLLOW STEP 5 AND REMOVE REAR SERVICE PANEL DISCONNECT WIRES REMOVE GRILL ELEMENT GUARD BY LOOSENING 2 HIDDEN SCREWS (POSITIONS INDICATED ) AND SLIDING OFF REMOVE THE 2 SCREWS SECURING THE ELEMENT BRACKET TO THE...
  • Page 87 E) MAIN/TOP OVEN BURNERS REMOVE THE BURNER SHIELD BY LOOSENING THE SCREW AS SHOWN SLIDE AWAY THE BURNER SHIELD REMOVE THE THERMOCOUPLE FROM THE BURNER ASSY BY RE- MOVEING THE SECURING NUT AND PULLING OUT FRON THE BURNER DISCONNECT THE BUNDY TUBE FROM THE SOLENOID VALVE TO THE OVEN BURNER...
  • Page 88 REMOVE THE 2 SCREWS SECURING THE BURNER ASSY IN THE CAVITY THE BURNER CAN NOW BE REMOVED BY PULLING INTO THE CAVITY REMEMBER TO DISCONNECT THE ELECTRODE LEAD BEFORE REMOVING COMPLETELY THE ELECTRODE CAN BE REPLACED BY REMOVING 1X SCREW AS SHOWN...
  • Page 89 F) MAIN OVEN SOLENOID FOLLOW STEP 5 AND REMOVE THE REAR SERVICE PANEL DISCONNECT WIRING DISCONNECT BOTH GAS CONNEC- TIONS AND REMOVE G) FAN TIMER PCB FOLLOW STEP 5 AND REMOVE THE REAR SERVICE PANEL RELEASE THE PCB FROM THE HOLDING CLIPS DISCONNECT WIRING...
  • Page 90 H) IGNITION GENERATOR RELEASE CLIPS BY PUSHING GENTLY WITH A SCREWDRIVER TIP PULL THE IGNITION GENERATOR FROM THE REAR OF THE APPLIANCE I) HINGES REMOVE THE 2X SCREWS AS SHOWN AND PULL THE HINGES OUT OF THE FRONTFRAME WHEN REPLACING IT IS IMPORTANT THAT THE EXACT SAME HINGE IS REPLACED AS THE SPRINGS IN THE HINGES ON ALL B/I APPLIANCES ARE...
  • Page 91 J) COOLING FAN FOLOW STEP 5 AND REMOVE THE REAR SERVICE PANEL REMOVE THE 4 X SCREWS AND RE- MOVE THE COOLING FAN K) MAIN OVEN LIGHT FITTING FOLLOW STEP 5 ) REMOVING REAR SERVICE PANEL REMOVE GLASS LAMP COVER BY UNSCREWING REMOVE THE EARTH LEAD RELEASE 4 XCLIPS HOLDING LIGHT...

  • Page 92: Technical Specifications

    TECHNICAL SPECIFICATIONS NOMINAL RESISTANCES AT 20oC *5,// (/(0(17   Ÿ Z &22/,1* )$1 NŸ THERMAL CUT-OUTS REAR....L100°C...

  • Page 93: Faultfinding Guides

    BELLING GAS BUILT-IN FAULTFINDING GUIDES...
  • Page 94 Built-in Gas double oven Main oven not working Customer reports main oven not working – top oven or grill OK. Is the clock set to manual? Advise customer on setting the timer Can the customer Does ignition start? smell gas in the oven? Replace micro switch Replace Spark...
  • Page 95 Top oven not working Customer reports top oven not working Does the grill work? Possible gas supply problem if whole appliance affected customer to have supply checked – if just top oven / Can the customer Does oven ignition grill send engineer and top smell gas in the oven? spark? oven thermostat...

This manual is also suitable for:

GasiGas built-in oven

Table of Contents