Removal Of Facia Panel; Removing The Door Seals - Belling GAS B Service Manual

4

3) REMOVAL OF FACIA PANEL

4) REMOVING THE DOOR SEALS

REMOVE THE CONTROL KNOBS
REMOVE THE 4 SECURING SCREWS
AS SHOWN (2 EACH SIDE)
PULL FACIA AWAY TO REMOVE
FULLY DISCONNECT THE WIRING TO
THE TIMER
THE DOOR SEAL IS REMOVED BY
JUST PULLING IT IS SECURED IN THE
GAP BETWEEN THE CAVITY AND
FRONFRAME AND REQUIRES NO
OTHER FIXING
TO REFIT PUSH IN ALWAYS ENSURE
THAT DOOR SEAL LIP IS FACING
CORRECT WAY