Fault Reset - Sena SPH10S User Manual

SPH10S

• Fault Reset

When the SPH10S is not working properly or is in a faulty
status for any reason, you may reset the system by pushing
the pin-hole reset button on the back of the left headset main
unit.
1. Detach the velcro pad inside of the left headset to see a
set-screw on the main module under the ear flap.
2. Turn the set-screw to the left to take the module apart from
the ear flap.
3. Take out the module from the front of the ear flap to see the
reset pin-hole on the opposite side of the module.
18
4. Insert a paper clip into the reset pin-hole and press the
reset button for 1 second with light pressure, at which time the
SPH10S will be switched off. Turn the SPH10S back on. By
powering back on, this will restore your current settings.
Detach