Firmware Upgrade; Operation Quick Reference - Sena SPH10S User Manual

FIRMWARE UPGRADE

The SPH10S supports firmware upgrade function. Please visit
SENA Bluetooth web site www.senabluetooth.com to check
the latest software downloads.

OPERATION QUICK REFERENCE

Button Description Duration
Power-on 1 sec
Phone Button +
Jog Dial
Power-off Tapping
Mobile phone
5 sec
pairing
MP3, GPS pairing 5 sec
8 sec
Voice activated
phone answering
Phone Button to enable
Phone Button
setting
Jog Dial to disable
12 sec
Factory reset
Jog Dial within 5 sec to confirm reset
Make & answer
Tapping
phone call
5 sec
Intercom pairing
Jog Dial of any one of the two headsets
8 sec
Voice activated
Jog Dial to enable
Intercom setting
Phone Button to disable
Start/end intercom
Tapping
conversation
Reject incoming
Tapping
Jog Dial
call
Call transfer Tapping
Volume
Rotating
adjustment
Track forward/ Rotating w/
back pressing
Play/pause
1 sec
Bluetooth music
SPH10S
LED Beep
Solid blue Ascending beeps
Solid red Descending beeps
Blue & red High-tone multiple
alternatively flashing beeps
Blue & red High-tone multiple
alternatively flashing beeps
Red flashing Mid-tone single beep
High-tone double
Solid red
beeps
- -
Red flashing Double-tone beeps
Solid red Mid-tone single beep
- -
- -
High-tone short/long
-
beep
- -
- -
- Mid-tone single beep
19