Sena SnowTalk 2 Bluetooth Headset with Intercom for Snow Helmets Quick Start Guide

INTRODUCTION

RIDE CONNECTED

With the Snowtalk 2, you can communicate with a group while out on the mountain. Want to listen to your favorite music as you ski? Connect to your phone via Bluetooth and listen to your tunes.

	Bluetooth ® 4.1
	Four-Way Intercom
	Intercom up to 700 m (0.4 mi)*
	Advanced Noise Control™

* in open terrain

GETTING STARTED

1. This product comes with a Quick Start Guide, which is a basic version of the User's Guide.
2. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit sena.com to see how to update your product.
3. Users can follow Sena on Facebook, YouTube, Twitter and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products.

How to Use This Guide

The legend and callouts are here to help you read the illustrations. New technology can be confusing, but we've created a simple way to perform actions using illustrations.

Icon Legend

Tap button the specified number of times
Press and Hold button for the specified amount of time
Audible prompt

Buttons

QUICK START GUIDE

Installation

Sena Outdoor App

By simply pairing your phone with your headset, you can use the Sena Outdoor App for quicker, easier setup and management.

• App Features
  • Music, Device settings, Quick Start Guide, and User's Guide.
• Download
  • Android: Google Play Store > Sena Outdoor
  • iOS: App Store > Sena Outdoor
    
    

Sena Device Manager

The Sena Device Manager allows you to upgrade firmware and configure settings directly from your PC. Download the Sena Device Manager from sena.com.

Basic Operations

Power On

Power Off

Volume Up

Volume Down

Checking the Battery Level

Visual Method

Visual method is for when powering the headset on.

Audible Method

Phone Pairing

There are three ways to pair the phone.

Initially Pairing the Headset

The headset will automatically enter the phone pairing mode when you initially turn on the headset or in the following situation:

• Rebooting after executing Factory Reset
  
  NOTE:
• The phone pairing mode lasts for 3 minutes.
• To cancel pairing, tap the (R) Button.

Pairing When the Headset Is Turned Off
While the headset is off, press and hold the (+) Button and (-) Button for 5 seconds.

Pairing When the Headset Is Turned On
While the headset is on, press and hold the (R) Button for 10 seconds.

Mobile Phone

Answer a Call

Reject a call

End a Call

Make a Call with the Voice Dialer

Music Controls

Play/Pause

Next Track

Previous Track

Bluetooth Intercom

Up to three other people can be paired with the headset for Bluetooth intercom conversations.

Intercom Pairing

Pairing with Intercom B

NOTE:
Repeat the step above to pair with Intercom Friends C & D.

Two-Way Intercom

Last-Come, First-Served

Start/End Conversation with Intercom Friend 1

Start/End Conversation with Intercom Friend 2

Start/End Conversation with Intercom Friend 3

TROUBLESHOOTING

Factory Reset

Fault Reset

NOTE:
Fault Reset will not restore the headset to the factory default settings.

QUICK REFERENCE

TYPE	OPERATION	BUTTON COMMANDS
Basic Operations	Power on
	Power off
	Volume up/down
Mobile Phone	Answer a call
	End/Reject a call
	Voice dial
Music	Play/Pause music
	Next/Previous track
Intercom	Intercom pairing
	Start/End intercom

SENA Technologies, Inc.
Customer Support: sena.com