Powering On/Off And Charging; Powering On; Powering Off; Charging - Sena SPH10S User Manual

Bluetooth stereo headset & intercom

Hide thumbs Also See for SPH10S:

Table of Contents

SPH10S

POWERING ON/OFF AND CHARGING

To power on and off the headset, you don't need to press and

hold any button for several seconds. Just short press the Jog

Dial and the Phone Button simultaneously, and you will get

quick on-and-off convenience.

Press the Jog Dial and the Phone Button at the same time for

about 1 second to power on. The blue LED turns on and you

will hear ascending beeps.

Just short press the Jog Dial and the Phone Button

simultaneously, you don't need to press and hold for a few

seconds. The red LED turns on for a while until it turns off

completely and you will hear descending beeps.

The LED turns on red while charging, and turns to blue when

the headset is fully charged. It takes about 2.5 hours to be

completely charged.

When the battery is low, the blinking blue LED in stand-by

mode turns to red and you will hear mid-tone triple beeps.

Table of Contents