Pairing The Sph10S With Bluetooth Devices; Mobile Phone Pairing; Bluetooth Mp3 Player Pairing - Sena SPH10S User Manual

PAIRING THE SPH10S WITH
BLUETOOTH DEVICES
Before using the SPH10S Bluetooth headset with any of
Bluetooth devices for the first time, you need to do the pairing
operation. It can be paired with Bluetooth mobile phones,
Bluetooth MP3, and with other SPH10S Bluetooth headsets.
This pairing operation is only required once for each Bluetooth
device, and the headset will remain paired with the devices
and automatically connects to the paired devices again when
they are within range.

• Mobile Phone Pairing

1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately and
you hear multiple beeps.
2. Search for Bluetooth devices on your mobile phone. The
headset will be listed on your mobile phone as SPH10S. (Some
mobile phone may not ask for the PIN number.)
3. Enter 0000 for the PIN
4. The headset can be paired as Handsfree or Headset.
Handsfree profile is normally recommended for most mobile
phones. If it is paired as Headset, the buttons of the SPH10S
may not work properly.

• Bluetooth MP3 Player Pairing

1. The procedure is the same with the procedure of "Mobile
Phone Pairing" except the SPH10S must be paired as Stereo
Headset.
2. If you use a Bluetooth mobile phone and a Bluetooth
audio device at the same time, please make sure to pair as
Handsfree or as Headset with the mobile phone and to pair
as Stereo Headset with the Bluetooth audio device.
SPH10S
7