Using The Sph10; Volume Adjustment; Mobile Phone Call Making And Answering; Enabling/Disabling Voice Activated Phone Answering (Factory Default: Disabled) - Sena SPH10S User Manual

USING THE SPH10

• Volume Adjustment

You can easily adjust the volume by rotating the Jog Dial.
You will hear a beep when the volume reaches maximum or
minimum level. The volume is set and maintained separately
at different levels for each function even when you turn off
and on the headset. For example, once you set the mobile
phone conversation volume, it is not changed even if you
raise the volume when you hear Bluetooth MP3 music. So you
can always maintain preferred optimum volume level for each
function.

• Mobile Phone Call Making and Answering

1. When you have an incoming call, simply tap the Phone
Button to answer the call.
2. You can also answer the incoming call by loudly speaking
any word of your choice if the Voice Activated Phone
Answering Function of the SPH10S is enabled. (Refer to the
next section for detail)
3. To reject a call, tap the Jog Dial while the phone is ringing.
4. To transfer a call between the mobile phone and the
headset, tap the Jog Dial during the phone conversation. You
will hear a short/long beep when the call is transferred to the
phone/headset.
5. There are several ways to make a phone call:
- Enter number on your mobile phone keypad and tap the
Phone Button. The call is automatically transferred to the
headset.
- Tap the Phone Button in stand-by mode to activate the
voice dialing of your mobile phone. For this, the voice
dialing feature must be available on the mobile phone.
Refer to your mobile phone manual for further instructions.
- To redial the last number, double tap the Phone Button in
stand-by mode.
• Enabling/Disabling Voice Activated Phone
Answering (Factory Default: Disabled)
If this feature is enabled, you can answer incoming calls by
simply saying a word loudly enough. For example, when you
hear a series of beeps by an incoming call, you can answer
SPH10S
11