Service Procedures
Removing the 3½-Inch Diskette Drive
To remove the 3½-inch diskette drive:
1)
Turn off the computer.
2)
Disconnect external devices, ac power and monitor power.
3)
Unlock and remove cover.
4)
Remove two screws securing the right side of diskette drive to chassis.
5)
Open the device bay & power supply subassembly. Refer to "Opening the Device Bay & Power
Supply Subassembly".
6)
Disconnect power and ribbon cables.
7)
Remove two screws securing the right side for SL models and left side for FP models of diskette drive
to chassis.
8)
Slide the diskette drive out of the front of the chassis.
Figure 3 - 10 Removing the 3½-Inch Diskette Drive
50
Digital STARION 200i/300i PC
MCS Logistics Engineering - Nijmegen