Refurbishment; Configuration Table - Invacare G50 Service Instructions Manual

SERVICE INSTRUCTIONS
8

Refurbishment

WARNING: Tilting danger!
Refurbishment of the wheelchair for re-use can lead to increased danger of tipping over!
• Always adhere to the table of permissible configurations when refurbishing the wheelchair for
re-use!
• With some seating systems and seat depths, the position of the seat needs to be moved
backward! If necessary, a new seat frame that allows two different seat positions will need to
be obtained from Invacare (available as a spare part)!
Note!
Use the different holes in the seat support to adjust the seat position (front or rear position).
• Seat in the rear position = use the rear holes
(1) to mount the seat plate.
• Seat in the front position = use the front holes
(2) to mount the seat plate.
Note!
When the seat is in the rear position, the short light fixation brackets
(1) must be used to hold the headlights, when the seat is in the front
position, long light fixation brackets (2) must be used (can be
obtained as spare parts).
8.1

Configuration table

Seating
system
Standard
Contour
Flex
Recaro
102
Seat depth Position of the seat
41
46
51
41
46
51
38
43
48
Wheel weights
Rear
Front
Front
Rear Necessary
Rear Necessary
Front
Rear Necessary
Rear Necessary
Rear Necessary
Front
®
Invacare - G50
Puncture proof
tyres in the rear
Necessary
Necessary
Necessary