Table of Contents
Advertisement
SERVICE INSTRUCTIONS
• The six screws that attach the seat plate to
the frame are located under the seat cushion.
• Four of them (1) are covered by Velcro strips.
The other two screws in the rear of the seat
plate are readily accessible.
• The screws which are concealed by the
Velcro strips need to be freed up at least
partially, using a cutter knife. This is
necessary, so that an Allen key 4 mm can be
inserted from above to prevent the the screw
from turning when the nuts under the seat are
loosened and removed.
• The six nuts (1) that need to be removed, so
that the seat plate can be taken off of the
frame, are located under the seat (only the
three nuts on the right side are shown in the
picture).
• Loosen and remove the nuts from the under
side of the seat plate, using the open-end
spanner 10 mm, while preventing the screws
from turning, using the Allen key 4 mm
inserted from above.
• Remove the complete seat unit.
74
®
Invacare
- G50
Advertisement
Table of Contents
