Replacing Electronics Components; Replacing The Power Module - Invacare G50 Service Instructions Manual

®
Invacare - G50
7.12

Replacing electronics components

Requirements:
• Open-end spanner 8 mm
• Crosstip screwdriver

7.12.1 Replacing the power module

• Remove rear cowling.
• Disconnect all plug-in connections of the
power module.
• Loosen and remove the fixation screws of the
power module using the open-end spanner
8 mm.
• Remove power module
• Re-assembly of the power module is carried out in the reverse order.
• Check all vehicle functions.
SERVICE INSTRUCTIONS
77