SERVICE INSTRUCTIONS
• The brake lever mechanism is held by four
screw. Loosen and remove the screws, using
an Allen key 3 mm.
• Remove the brake lever mechanism.
• Loosen the nuts on the Bowden cable
clamping screws (1) on both sides with the
open-end spanner 10 mm, so that the inner
steel cables of the Bowden cables are not
under tension.
• Loosen the counter nuts of the adjustment
screws, using an open-end spanner 8 mm.
• Completely remove both adjustment screws.
• Release the Bowden cable that is to be
replaced from the eccentric disc.
62
®
Invacare
- G50