Invacare G50 Service Instructions Manual page 17

®
Invacare - G50
Component
Battery fixation belts /
buckles
Cables / cable looms
Joystick box / bus cable
Lighting
Frame
Frame (chassis) / Battery
cradle
Wheels / Tyres
Drive wheels
Steering wheels
Pneumatic tyres
Steering mechanism
Check for
• Check that the cable
clamps are firmly
attached to the battery
terminals
• Damage
• Firmly attached
• Damage
• Plug-in connections are
firmly connected
• Damage
• Check that all plug-in
connections are firmly
connected
• Check that all screws are
tight
• Function
• Light bulbs defective
• Casing / glass damaged
• Position / angle out of
adjustment
• Check fixation, weld
seams and battery cradle
for damage
• Check for tight fit and
axial run out
• Check for tight fit, check
required motor-to-body
clearance and axial run
out
• Damage
SERVICE INSTRUCTIONS
Measures
• Tighten
• Replace
• Tighten
• Replace
• Firmly press the
connection together (See
"Checking the cables"
on page 87)
• Replace
• Firmly press the plug-in
connection together (See
"Checking the cables"
on page 87)
• Tighten
• Send in to Invacare to be
repaired, if necessary
replace (See "Replacing
the ACS Remote" on
page 90)
• Replace
• Replace
• Adjust
• Tighten screws, replace
components
• Adjust
• Replace wheels or wheel
bearings.
• Repair or replace, if
damaged (See
"Repairing a flat tyre" on
page 97)
17