Code Bytes Usage; Code Bytes 0-9 - Honeywell MS9540 Manual

The features that use these code bytes for configuration require that the
scanner be in Configuration Mode. The Enter/Exit Configuration Mode bar
code (on page 2) must be scanned before starting the configuration cycle.
Example: User configurable prefix/suffix characters can be saved into the scanner by
scanning the 3 digit decimal equivalent of the ASCII character into the
appropriate character location with the code byte bar codes.
To add an Asterisk (*) as a Prefix scan the following bar codes in order.
1. Enter/Exit Configuration Mode
2. Configurable Prefix #1
3. Code Byte 0
4. Code Byte 4
5. Code Byte 2
6. Enter/Exit Configuration Mode
C B 0-9
ODE YTES
³ 0
³ 1
³ 2
³ 3
³ 4
³ 5
³ 6
³ 7
³ 8
³ 9
70
C B
ODE YTES
Code Byte 0
Code Byte 1
Code Byte 2
Code Byte 3
Code Byte 4
Code Byte 5
Code Byte 6
Code Byte 7
Code Byte 8
Code Byte 9
U
SAGE
(3 beeps)
(1 beep)
(1 beep)
(2 beeps)
(3 beeps)
(3 beeps)