Ms9535 Voyagerbt - Honeywell MS9540 Manual

When the MS9535 acts as a client to other Bluetooth devices that have a
Bluetooth address that is NOT headed with FNC3 but is just a common 12-digit
hex value (e.g. 000CA700118), scan the Get Bluetooth Address code first, then
scan the devices address bar code.
Scan the Provide Service bar code to place the MS9535 into service mode. In this
mode, other Bluetooth-enabled devices can initiate a connection to the scanner.
³ 1 2 4 3
³ 1 2 4 3
³ 8 4 0 9
³ 9 9 9 9
³ 9 9 8 0
³ 9 9 8 0
³ 8 1 9 5
³ 8 1 9 5
MS9535 V
Get Bluetooth Address
³ 0 0 0
Provide Bluetooth Service
³ 0 0 0
Bluetooth PIN Required – the MS9535 will require
a valid Bluetooth PIN when Bluetooth-enabled
1 6
devices try to initiate a communication connection.
* Bluetooth Pin Not Required
0 6
Bluetooth PIN Default Value – the default PIN ID
will be the last 4 digits of the serial number
0 0
Next Bar Code is Bluetooth Pin – when scanned
this feature enables the scanner to store the next
1 8
scanned bar code as the Bluetooth PIN ID. The
Bluetooth PIN ID must be numeric and be 4 to 16
characters in length.
The Bluetooth PIN Required bar code (shown
above) must also be scanned to utilize the PIN ID.
Enable Bluetooth Address Transmission
4 5
Enable Bluetooth Software Version Transmission
4 4
Sleep in 1 Minute - The scanner will go into sleep
(power save) mode after the laser has been off for
6 0
1 minute.
Sleep in 2 Minutes - The scanner will go into sleep
mode after the laser has been off for 2 minutes.
1 2 0
OYAGER
C A 7 F F
C A 7 0 0 0
BT
®
F F F F
0 0 0
83