Laser/Scan Modes - Honeywell MS9540 Manual

MS9520 V
L /S M
ASER CAN
³ 4 1 8 3
³ 4 1 8 3
³ 4 1 8 3
³ 4 1 8 3
³ 4 1 8 3
³ 1 2 0 0
³ 1 2 0 0
Note: MS9520 models from Rev H and beyond will be equipped with limited
PDF scan/decode capability. Please refer to the section titled, MS9524 &
MS3544 VoyagerPDF Series for configuration bar codes. Unlike the
MS9544 and the MS9524, PDF reading is not a factory default and must
be enabled before attempting to use.
®
OYAGER
ODES
* Normal Scan - Laser turns on after the IR senses a
bar code. The laser remains on for approximately 3
0 4
to 10 seconds.
Blinky Scan - Laser turns on after the IR senses a
bar code. The laser will blink on/off for
2 4
approximately 60 seconds.
Continuous Blinky Scan - The laser blinks
continuously and the IR is inactive. This feature is
3 4
not available for the VoyagerPDF series.
Custom (One Shot) Scan - The laser turns off
after a good decode.
4 4
Enable Manual Activation Mode - The laser
activates when the CodeGate button is pressed.
5 4
* Normal Timeout (Button Act)
0 0
0.5 Second Timeout (Button Act)
1 0
& MS9540 V
CG
®
OYAGER
S
ERIES
79