Code Bytes; Code Byte Usage - Honeywell ms 7820 Solaris User Manual

S M
ECTION
User configurable prefixes, symbol length and other features that use these code bytes
for configuration, require that the scanner be in configuration mode. Scan the Enter/Exit
Configuration Mode bar code before starting the configuration cycle. Single code
configuration mode does not work for these multi-code sequences.
E
XAMPLE
User configurable prefix/suffix characters (Section E) can be saved into the
scanner by scanning the 3 digit decimal equivalent of the ASCII character into
the appropriate character location with the code byte bar codes.
To add an asterisk (*) as a prefix scan the following bar codes in order:
1. Enter/Exit Configuration Mode
2. Configurable Prefix 1
3. Code Byte 0
4. Code Byte 4
5. Code Byte 2
6. Enter/Exit Configuration Mode
Enter/Exit Configuration Mode
³ 9 9 9 9 9
(3 beeps)
(1 beep)
(1 beep)
(2 beeps)
(3 beeps)
(3 beeps)

Code Bytes

C B
ODE YTE
9
1
M
U
SAGE