Honeywell MS9540 Manual page 91

³ 8 1 9 5
³ 8 1 9 5
³ 1 2 3 9
³ 1 2 3 9
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
84
MS9535 V
Sleep in 5 Minutes - The scanner will go into sleep
mode after the laser has been off for 5 minutes.
3 0 0
Sleep in 10 Minutes - The scanner will go into sleep
mode after the laser has been off for 10 minutes.
6 0 0
* Enable Scanning in Cradle
0 7
Disable Scanning in Cradle
1 7
Enable In Stand Error Audio Indicator –
Activates an audible indicator the when Bluetooth
1 1
scanner is in-the-stand/charging cradle but is not
making contact via the battery terminal contacts.
* Disable In Stand Error Indicator
0 1
* Enable Cradle LED
0 2
Disable Cradle LED
1 2
Enable Range Gate - Store scanned barcodes into
RAM if the Bluetooth connection has been
0 7
interrupted.
* Disable Range Gate
1 7
Enable Bluetooth Test - The cradle will display
certain connection information ( KO, OK, etc.)
1 6
Do not enable this feature unless
instructed to by a Metrologic representative.
* Disable Bluetooth Test
0 6
BT
®
OYAGER