Communications - Honeywell MS9540 Manual

³ 4 1 5 5 2
³ 4 1 5 5 5
³ 9 9 9 9 9
³ 5 1 5 5 1
³ 5 1 5 5 1
³ 9 9 9 9 9
³ 4 1 5 5 4
³ 9 9 9 9 9
³ 4 1 5 5 0
³ 4 1 5 5 3
³ 9 1 7 5 0
³ 4 1 5 5 6
C
OMMUNICATIONS
Enable Light Pen/Wand Communication - Use
this option if scanner should be used in place of a
4
light pen.
* Enable RS232 - The scanner will work with
RS232 +/- 12V serial output.
4
Load Keyboard Wedge Defaults - Scan this code
before selecting Normal or Stand Alone Wedge
4
Mode.
Enable Stand-Alone Keyboard Scanner - Allows
scanner to be used without an external keyboard.
5 3
Enable Keyboard Wedge Emulation - Select if
the scanner provides keyboard emulation by
4 3
converting the scanned bar code data to the PC
keyboard scan code equivalent.
Load OCIA Defaults - Scan this code before
selecting Enable OCIA output.
3
Enable OCIA Output - Select this option if the
communications requirement is on Optically
4
Coupled Interface Adapter (OCIA). This is a
docked (by the host) serial interface.
Load IBM 46xx Defaults
5
Enable IBM 46xx Communication - Select this
option for IBM 46xx SIOC/RS485 communications.
4
Not all scanners support this interface. The correct
interface board is required.
Enable No Communication Mode - Select this
option if the scanner does not interface with the
4
host device.
Reserved
0
Reserved
4
25