User Configurable Id Characters, Code Specific - Honeywell MS9540 Manual

U C
SER ONFIGURABLE
³ 1 0 5 5
³ 1 0 5 5
‡ Enter configuration mode then scan this bar code followed by the three code
byte bar codes (on page 70) that represent a unique ID character to be
associated with this bar code type.
³ 9 0 5 6
³ 9 0 5 7
³ 9 0 5 8
³ 9 0 5 9
³ 9 0 6 0
³ 9 0 6 1
³ 9 0 6 3
³ 9 0 6 4
³ 9 0 6 2
P
REFIXES
ID C
HARACTERS
* Use Configurable Code ID Bytes as Prefixes -
User configured, code specific ID bytes are
0 7
transmitted before the data. If using prefixes, user
configured suffixes can not be used.
Use Configurable Code ID Bytes as Suffixes -
User configured, code specific ID bytes are
1 7
transmitted after the data. If using suffixes, user
configured prefixes can not be used.
~ Configurable UPC-A ID ‡
0 0
~ Configurable UPC-E ID ‡
0 0
~ Configurable EAN-8 ID ‡
0 0
~ Configurable EAN-13 ID ‡
0 0
~ Configurable Code 39 ID ‡
0 0
~ Configurable Code 128 ID ‡
0 0
~ Configurable Code 93 ID ‡
0 0
~ Configurable Code 11 ID ‡
0 0
~ Configurable Telepen ID ‡
0 0
/S
UFFIXES
, C S
ODE PECIFIC
37