Of 5 Codes - Honeywell MS9540 Manual

C 39
ODE
³ 1 1 5 4
³ 1 1 5 4
2 5 C
OF ODES
³ 1 0 0 1
³ 1 0 0 1
³ 1 0 0 3
³ 1 0 0 3
³ 1 0 7 8
³ 1 0 7 8
³ 9 0 1 6
³ 9 0 1 7
³ 9 0 3 4
6
C T
ODE YPES AND
Enable Alternate Code 39 Reference Comparison
Check – assists with elements that are below the
1 3
2 to 1 (wide to narrow) element width requirement.
* Normal Code 39 Reference Comparison Check
0 3
* Enable Interleaved 2 of 5 (ITF)
1 5
Disable Interleaved 2 of 5 (ITF)
0 5
Enable MOD 10 Check on ITF - The scanner will
only scan Interleaved 2 of 5 (ITF) bar codes that
1 0
have a Modulo 10 check digit.
* Disable MOD 10 Check on ITF
0 0
Allow ITF Null Characters
1 7
* Do Not Allow ITF Null Characters
0 7
~ ITF Symbol Length Lock 1 - To specify a 1st ITF
symbol length lock, scan this bar code and the
0 0
appropriate code byte sequence located on page 70.
~ ITF Symbol Length Lock 2 - To specify a 2
symbol length lock, scan this bar code and the
0 0
appropriate code byte sequence located on page 70.
~ ITF Minimum Symbol Length - To specify a
minimum number of ITF characters to be decoded,
0 0
scan the appropriate code byte sequence located on
page 70.
D R
ECODE ULES
nd
ITF