Standard Prefix Characters - Honeywell MS9540 Manual

S P
TANDARD REFIX
³ 1 1 6 6
³ 1 1 6 6
³ 1 0 5 5
³ 1 0 5 5
³ 1 0 7 9
³ 1 0 7 9
³ 1 1 6 6
³ 1 1 6 6
³ 1 0 7 9
³ 1 0 7 9
³ 9 4 1 5
³ 1 0 7 9
³ 1 0 7 9
P
REFIXES
C
HARACTERS
Enable STX Prefix - The scanner will transmit a
Start of TeXt (ASCII 02H) before each bar code.
1 5
* Disable STX Prefix
0 5
Enable Rochford-Thomson Mode
1 3
* Disable Rochford-Thomson Mode
0 3
Enable AIM ID Characters
1 5
* Disable AIM ID Characters
0 5
Enable UPC Prefix ID - The scanner will transmit a
prefix before any UPC/EAN bar code. The prefixes
1 7
are A (UPC-A), E0 (UPC-E), F (EAN-13), and FF
(EAN-8).
* Disable UPC Prefix ID.
0 7
Enable NCR Prefix ID - The scanner will transmit a
prefix before the following code types. The prefixes
1 1
are as follows: A (UPC-A), E0 (UPC-E), FF (EAN-8),
F (EAN 13), B1 (Code 39) B2 (ITF), B3 (Code 128
and other codes).
* Disable NCR Prefix ID
0 1
Enable NCR Prefix Character
0 0
Enable Nixdorf ID Characters - This option
transmits code identities before each bar code for
1 7
many Siemen/Nixdorf registers.
* Disable Nixdorf ID Characters
0 7
/S
UFFIXES
39