Video Set Menu - Sony PMW-300K1 Operating Instructions Manual

VIDEO SET Menu

VIDEO SET
Menu items Setting values
Input Source Camera / i.LINK
Select
Setting the input
source
SDI/HDMI/ When using UDF HD Mode
i.LINK I/O
Select
Selecting input/
output signals for
When using FAT HD Mode (HQ)
the connectors
When using FAT HD Mode (SP)
When using UDF SD Mode
When using FAT SD Mode
SDI/HDMI/
Video Out
Super
Setting the
character
information for
each output
Down
Converter
Selecting the
operation mode of
the down converter
90 Setup Menu List
HD SDI & HD HDMI
SD SDI & SD HDMI i
SD HDMI P
Off
HD SDI & HD HDMI
SD SDI & SD HDMI i
SD HDMI i & DVCAM
SD HDMI P
Off
HD SDI & HD HDMI
SD SDI & SD HDMI i
HD HDMI & HDV
SD HDMI i & HDV
SD HDMI P & HDV
SD HDMI i & DVCAM
Off
SD SDI & SD HDMI i
Off
SD SDI & SD HDMI i
SD HDMI i & DVCAM
Off
On / Off
Squeeze / Letterbox / Edge
Crop
Contents
Select video and audio signal for the input source.
Camera: Camera image
i.LINK: HDV/DVCAM input via the i.LINK (HDV/DV)
connector
Note
i.LINK is unavailable when using UDF.
HD SDI & HD HDMI: To output HD SDI signals from the
SDI OUT connector, and HD HDMI signals from the
HDMI OUT connector.
SD SDI & SD HDMI i: To output SD SDI signals from the
SDI OUT connector, and SD HDMI interlace signals from
the HDMI OUT connector.
HD HDMI & HDV: To output HD HDMI signals from the
HDMI OUT connector, and input/output HDV streams
from the i.LINK (HDV/DV) connector.
SD HDMI i & HDV: To output SD HDMI interlace signals
from the HDMI OUT connector, and input/output HDV
streams from the i.LINK (HDV/DV) connector.
SD HDMI P & HDV: To output SD HDMI progressive
signals from the HDMI OUT connector, and input/output
HDV streams from the i.LINK (HDV/DV) connector.
SD HDMI i & DVCAM: To output SD HDMI interlace
signals from the HDMI OUT connector, and input/output
DVCAM streams from the i.LINK (HDV/DV) connector.
SD HDMI P: To output SD HDMI progressive signals from
the HDMI OUT connector.
Off: There is no output from the SDI/HDMI/i.LINK
connectors.
Notes
• Signals are not output from the SDI OUT connector when
this is set to other than an HD SDI or SD SDI setting.
• Slow & Quick Motion mode cannot be used when this is
set to input/output DVCAM streams.
Set whether to add the menus and status indications of the
viewfinder screen to the output of the SDI OUT, HDMI OUT,
and VIDEO OUT connectors.
Note
On the thumbnail, EXPAND CLIP and SHOT MARK
screens, the menus and status indications on the viewfinder
screen are displayed regardless of the setting of this item.
Set the output mode (aspect) for SD signals
Squeeze: To horizontally reduce a 16:9 picture to output a 4:3
picture
Letterbox: To mask the upper and lower areas of a 4:3 picture
to display a 16:9 picture in the center of the screen
Edge Crop: To cut the both sides of a 16:9 picture to output a
4:3 picture