Sony PMW-300K1 Operating Instructions Manual page 83

CAMERA SET
Menu items Subitems and setting values Contents
Zoom Linear / Soft
Transition
Setting the zoom
operation mode
Interval Rec
Setting
On / Off
Setting the Interval
Recording
Interval Time
function
1 to 10/15/20/30/40/50 sec
1 to 10/15/20/30/40/50 min
1 to 4/6/12/24 hour
Number of Frames
1 / 3 / 6 / 9 or
2 / 6 / 12 (When using 720/
59.94P or 720/50P)
Frame Rec Setting
On / Off
Setting the Frame
Recording
Number of Frames
function
1 / 3 / 6 / 9 or
2 / 6 / 12 (When using 720/
59.94P or 720/50P)
Clip Cont. Rec
Setting
On / Off
Setting the Clip
Continuous
Recording
function
P.Cache Rec Setting
On / Off
Setting the Picture
Cache Recording
Rec Time
function
0-2sec / 2-4sec / 4-6sec /
6-8sec / 8-10sec / 10-12sec /
12-14sec / 13-15sec
Set the operation mode at the beginning and end of zooming
with the on-handle ZOOM button.
Linear: Zooming immediately begins at the specified speed
when the on-handle ZOOM button is pressed and
immediately ends when the button is released.
Soft: Zooming gradually increases the speed up to the
specified speed after the on-handle ZOOM button is
pressed and gradually decreases the speed and ends after
the button is released. (1 second at maximum from when
the button is released till the operation ends.)
Turn the Interval Recording function on/off.
Set the interval of recording in Interval Recording.
Set the number of frames to be recorded at a time in Interval
Recording.
Turn the Frame Recording function on/off.
Set the number of frames to be recorded at a time in Frame
Recording.
Turn the Clip Continuous Recording function on/off.
Turn the Picture Cache Recording function on/off.
Set the time to cache video in the picture cache memory (the
time to a point where recording is to start when you press the
REC START/STOP button in Picture Cache Recording).
Setup Menu List 83