Video Set Menu - Sony PXW-X200 Operating Instructions Manual

VIDEO SET Menu

VIDEO SET
Menu items
Input Source
Select
Setting the input
source
SDI/HDMI/
i.LINK I/O
Select
Selecting input/
output signals for
the connectors
106 Setup Menu List
Setting values
Camera / i.LINK
When using exFAT HD Mode
3G SDI & HD HDMI
HD SDI & HD HDMI
SD SDI & SD HDMI i
SD HDMI P
Off
When using UDF HD Mode
HD SDI & HD HDMI
SD SDI & SD HDMI i
SD HDMI P
Off
When using FAT HD Mode (HQ)
HD SDI & HD HDMI
SD SDI & SD HDMI i
SD HDMI i & DVCAM
SD HDMI P
Off
When using FAT HD Mode (SP)
HD SDI & HD HDMI
SD SDI & SD HDMI i
HD HDMI & HDV
SD HDMI i & HDV
SD HDMI P & HDV
SD HDMI i & DVCAM
Off
When using exFAT SD Mode or
UDF SD Mode
SD SDI & SD HDMI i
Off
When using FAT SD Mode
SD SDI & SD HDMI i
SD HDMI i & DVCAM
Off
Contents
Select video and audio signal for the input source.
Camera: Camera image
i.LINK: HDV/DVCAM input via the i.LINK (HDV/DV)
connector
Notes
• "i.LINK" is unavailable for UDF or exFAT.
• "i.LINK" is unavailable when "NW&Proxy/USB" is set to
"Network&Prxoy."
3G SDI & HD HDMI: To output 3G SDI signals from the
SDI OUT connector, and HD HDMI signals from the
HDMI OUT connector.
HD SDI & HD HDMI: To output HD SDI signals from the
SDI OUT connector, and HD HDMI signals from the
HDMI OUT connector.
SD SDI & SD HDMI i: To output SD SDI signals from the
SDI OUT connector, and SD HDMI interlace signals from
the HDMI OUT connector.
HD HDMI & HDV: To output HD HDMI signals from the
HDMI OUT connector, and input/output HDV streams
from the i.LINK (HDV/DV) connector.
SD HDMI i & HDV: To output SD HDMI interlace signals
from the HDMI OUT connector, and input/output HDV
streams from the i.LINK (HDV/DV) connector.
SD HDMI P & HDV: To output SD HDMI progressive
signals from the HDMI OUT connector, and input/output
HDV streams from the i.LINK (HDV/DV) connector.
SD HDMI i & DVCAM: To output SD HDMI interlace
signals from the HDMI OUT connector, and input/output
DVCAM streams from the i.LINK (HDV/DV) connector.
SD HDMI P: To output SD HDMI progressive signals from
the HDMI OUT connector.
Off: There is no output from the SDI OUT/HDMI OUT/
i.LINK connectors.
Notes
• Signals are not output from the SDI OUT connector when
this is set to other than an HD SDI or SD SDI setting.
• Slow & Quick Motion mode cannot be used when this is
set to input/output DVCAM streams.
• When "NW&Proxy/USB" is set to "Network&Prxoy,"
signals are not output from the HDMI OUT, VIDEO OUT,
and A/V OUT connector, and signals are not input/output
from the i.LINK connector.
• When "NW&Proxy/USB" is set to "Network&Prxoy,"
"SDI/HDMI/i.LINK I/O Select" is set to the following
setting automatically and cannot be selected.
—For exFAT HD, UDF HD, FAT HD: "HD SDI & HD
HDMI"
—For exFAT SD, UDF SD, FAT SD: "SD SDI & SD
HDMI i"