Monitoring; Built-In Microphone; Media; Supplied Accessories - Sony PMW-300K1 Operating Instructions Manual

MIC: -70 dBu to -30 dBu
Video Output
BNC type (1), HD-Y/composite signal
1.0 Vp-p, 75 Ω
Audio Output
RCA pin jack (CH-1, CH-2)
SDI output
BNC type (2), switchable with HD/SD
SMPTE292M/259M
i.LINK
IEEE 1394, 4-pin connector (1), HDV
(HDV 1080i) input/output, DV input/
output, S400
Timecode Input
BNC type (1), switchable with TC OUT
connector, SMPTE 12M-2-2008
0.5 V to 18 Vp-p, 10 kΩ
Timecode Output
BNC type (1), switchable with TC IN
connector, SMPTE 12M-2-2008
1.0 Vp-p, 10 kΩ
GENLOCK Input
BNC type (1)
1.0 Vp-p, 75 Ω
USB
USB connector (type A) (1), USB
connector (mini B) (1)
Headphone Output
Stereo minijack (1)
-18 dBu 16 Ω
Speaker Output
Monaural
Output: 150 mW
DC Input
DC jack
Remote
8-pin
Lens Remote
8-pin round (1)
144 Specifications
HDMI Output
Type A (1)

Monitoring

Viewfinder
3.5-inch color LCD monitor: 960 (H) ×
3 (RGB) × 540 (V), 16:9

Built-in Microphone

Built-in Microphone
Omnidirectional stereo electret
condenser microphone

Media

Type
ExpressCard/34 (2)

Supplied Accessories

Lens (1)
Lens hood with the lens cap (1) (pre-attached to
the lens)
Lens mount cap (1)
Lens cap (1)
Viewfinder (1)
Cold shoe kit (1)
Infrared Remote Commander (1)
Battery charger (1)
Lithium-Ion Battery BP-U30 (1)
USB cable (1)
Shoulder strap (1)
Lithium battery (CR2032 for backup) (1)
This is pre-installed to the camcorder.
Lithium battery (CR2025 for the IR Remote
Commander) (1)
This is pre-installed to the IR Remote
Commander.
Before Using this Unit (1)
CD-ROM (Operating Instructions) (1)